Euroquip Limited
<< Home page
Tyre warmers | Contact us | About us
DRUM HEATERS
Designed to maintain or increase the temperature of a product
     
Menu
 

Technical specs
Options

Click here to see full-size photo
 
During the manufacturing process it is often necessary to either maintain or increase the temperature of a product. This is usually to improve its performance, or in many cases to make a product viscous enough to be simply able to use it, or remove it from a drum.

Euroquip heaters are used in these industries:

  • Oil, tar and fat users
  • Small printing industries
  • Small process lines using glue
  • Small spray painters
  • IBC users, for low temperature maintenance and frost protection
 
Technical Details
All Euroquip heaters are manufactured around the design of an element carrier retaining a spiral wound silicon-insulated resistance wire. The carrier is then thermally insulated, and an outer cover is sewn on. The method of fixing depends upon the application; these are typically webbing straps with quick-release buckles, draw cords, Velcro and eyelets.
Material
Polyurethane/Nylon
Polyester
Glass Cloth
Maximum wattage
500 watts per sq. metre
1000 watts per sq. metre
1200 watts per sq. metre
Maximum size
6.0m x 1.5m
6m x 1.5m
4m x 1.2m
Temperature range
100 degrees C
140 degrees C
190 degrees C
Properties
Flexible
Flexible
Temperature resistance
Easy-clean
Easy-clean
Easy-clean
Durable
Durable
Voltage
Standard 220/240 & 110 volts Low voltage on request
Temperature control
Pre-set thermostats range from 30 C in 10 C intervals
Capillary and bulb thermostats 0 - 90 C, 0 - 120 C, 20 - 220 C
Electronic control with LED display & touch-pad control 50 - 150 C

 
Options Available
 
Standard sizes
25 litre
50 litre
105 litre
200 litre
Standard voltages
230 volts
110 volts
Temperature ranges
-5 - 40 C
0 - 90 C
20 - 220 C
Euroquip Limited,  Unit 3 Suncrest, Throcking Lane, Buntingford, Hertfordshire SG9 9RP United Kingdom
Telephone: +44 (0) 1763 272577